Putting to operation
Cirrus 3/4/6000 DB2034 08.04
107
3. Climb onto the stair step and slacken the rubber
loops (Fig. 170/1).
The hopper cover is secured by rubber loops against
unintended opening when the machine is moving.
Fig. 170
4. Take the ladder out of the catch (Fig. 171/1) and
lower until the stop.
Fig. 171
5. Climb onto the platform using the ladder.
6. Slacken the rubber loops.
7. Open the hopper cover.
8. If necessary, remove foreign parts from the seed
hopper.
Fig. 172