General safety advice
Cirrus 3/4/6000 DB2034 08.04
15
2.8 Safety measures and normal operation
Operate the machine only with all safety devices and guards properly functioning.
Check the machine at least once a day for externally recognisable damage and for
function of the safety devices and guards.
2.9 Danger from residual power
Observe the incidence of mechanic, hydraulic, pneumatic, and electric/electronic
residual power on the machine.
Undertake appropriate measures when instructing the operating staff. Detailed hints
are again given in the relevant chapters of this instruction manual.
2.10 Danger points in particular
Special danger points exists
• In the coupling range between tractor and machine
• Under the lifted machine
• In the operational range of moving parts.
2.11 Maintenance and repair, remedy of faults
Carry out all prescribed setting-, maintenance and servicing work in due time.
Secure all operating systems like compressed air and hydraulics against unintended
starting.
When exchanging larger components carefully affix them to the hoisting implement.
Check slackened screw joints for firm seating. After having finished maintenance work,
carefully check all safety devices for proper function.
To Next Page
Loading...
Need help?
General
