Putting to operation
110
Cirrus 3/4/6000 DB2034 08.04
7.5 Lowering the pre emergence marker into working position
For transport both track marker carriers are affixed in
the retainers with the aid of pins (Fig. 175/1).
Caution
Only carry out any mounting with
stopped engine, applied parking brake
and removed ignition key.
Lowering the pre-emergence marker into working
position:
- Hold the track marker carrier.
- Slacken the split pin (Fig. 175/2) and remove the pin
(Fig. 175/1).
Fig. 178
- Manually lower the track marker carrier.
- Repeat this procedure for the second track marker
carrier.
Fig. 179
To Next Page
Loading...
Need help?
General
