Putting to operation
104
Cirrus 3/4/6000 DB2034 08.04
- Actuate control unit 2 to lower the machine down
into work
Fig. 162
7.2.1.2 Folding in machine wings
Folding in machine wings:
- Release the parking brake and remove your foot
from the brake pedal.
Never leave the tractor cab with the parking brake
is released.
- Actuate control unit 2 until the machine has been
fully lifted (see Fig. 163).
Otherwise the operational tools will be damaged
during the folding procedure.
- Apply the parking brake.
Fig. 163
- Recall the operation menu in .
- Press shift-Taste
(key on the rear of )
- Press key (Fig. 164/1) until the symbol (Fig.
164/2) appears.
- Lock the star wheel (see operator's manual
for ).
The function star wheel is locked when the symbol
(Fig. 164/3) is shown in the operation menu.
- Switch off Low-Lift-function (see operator man-
ual ).
The Low-Lift-function is switched off when the
symbol (Fig. 164/4) is not shown in the operation
menu.
Fig. 164