To Next Page

To Previous Page

Description of produce

Cirrus 3/4/6000 DB2034 08.04

3.7 Conformity

Guide lines, standard terms and descriptions

Cirrus fulfils the machine guide line 98/37/EC

3.8 Details about noise level

The tractor operator seat related emission value (noise level) is 74 dB (A), measured

when operating with closed tractor cab at the ear of the operator.

Measuring implement: OPTAC SLM 5.

The height of the noise level mainly depends on the tractor used.

Table of Contents6
Advice for the User10
Purpose of the Document10
Information about Directions in this Operator's Manual10
Illustrations Used10
Enumerations10
Identification in Illustrations (Figures)10
General Safety Advice11
Obligations and Liability11
Illustration of Safety Advice12
Designated Use of the Machine13
Organising Measures13
Safety Device and Guards14
Defective Safety Devices14
Informal Safety Measures14
Training of the Staff14
Safety Measures and Normal Operation15
Danger from Residual Power15
Danger Points in Particular15
Maintenance and Repair, Remedy of Faults15
Constructional Changes16
Alterations or Changes16
Spare Parts and Wearing Parts and Auxiliary Parts16
Cleaning and Disposal16
Workplace of the Operator16
Safety Symbols and Other Identifications on the Machine17
Danger When Not Adhering to the Safety Advice22
Safety Conscious Operation22
Safety Advice for the Operator22
General Safety and Accident Prevention Advice22
Operating Devices23
Operation - Seed Drills24
Towed Implements24
Hydraulic System25
Electric Outfit26
Maintenance, Repair and Care Work26
Brakes and Tyres26
Description of Product27
Overview - Components27
Danger Zones32
Positioning of Safety Symbols and Other Identifications33
Type Plate and CE-Sign35
Technical Data36
Location of Optional Equipment Required in Road Traffic38
Conformity39
Details about Noise Level39
Assembly and Function40
Seed Hopper and Seed Metering41
Metering Rollers41
Normal Metering Roller41
Fine Metering Roller (Option)42
Medium Fine Metering Roller (Option)42
Seed Level Sensor43
Star Wheel43
Vario Gearbox44
Full Electric Metering System (Option)44
Seed Collecting Trays45
Fan45
Twin Row Disc Cultivator46
Wedge Ring Tyre Roller47
Packer Coulter48
Extra Coverage Following Harrow49
Track Markers50
Operator Terminal51
Distributor Head and Tramline System52
Pre Emergence Marker (Option)53
Braking System54
Electric Hydraulic Control Block54
Settings55
Selection of Metering Wheels55
Exchanging Metering Wheels56
Setting the Seed Level Sensor58
Setting the Seed Rate in the Menu "Job59
Proportional Seed Rate Change During Operation60
Calibration Test60
Calibration Test on Cirrus with Vario Gearbox with Seed Rate Remote Control60
Calibration of the Cirrus with Full Electric Metering63
Fan Speed64
Fan Speed Table64
Setting the Fan Speed on the Oil Flow Control Valve of the Tractor65
Setting the Fan Speed on the Pressure Relief Valve of the Machine65
Setting the Fan Speed in66
Alarm Trigger Limit When the Fan Speed Deviates from the Required Value66
Setting the Seed Placement Depth67
Advice for Setting the Seed Placement Depth69
Setting the Length of the Track Markers70
Track Marker Length Dimensions70
Setting the Working Intensity of the Track Markers71
Disc Harrow72
Setting the Working Intensity72
Setting the Length of the Outer Disc Legs72
Setting the Side Discs73
Extra Coverage Following Harrow74
Extra Coverage Following Harrow - Spring Tine Position74
Extra Coverage Following Harrow Pressure75
Setting the Normal Harrow Pressure75
Setting the Increased Extra Coverage Following Harrow Pressure75
Tramline System76
Tramline Rhythm76
5.10.1.1 Example for Creating Tramlines78
Tramline Rhythm 4, 6 and 880
5.10.1.3 Tramline Rhythm 2 and 6Plus81
Setting the Tramline Rhythm82
Setting the Tramline Counter82
Seed Rate Reduction When Creating Tramlines83
Switching on or off the Intermittent Tramline Function83
Pre-Emergence Marker (Option)84
Marker Disc Carrier in the Operational / Transport Position84
Setting the Track Width and the Working Intensity of the Pre Emergence Marker84
Setting the Running Time of the Pre-Charging System on the Headlands85
Initial Operation86
Required Tractor86
Required Tractor Capacity86
Tractor Engine Capacity86
Tractor Pump Capacity, Hydraulic86
Tractor Connections, Hydraulic (Control Valve)86
Required Air Pressure Connections for Dual Circuit Air Brake System87
Tractor Connections, Electric87
Tractor Hydraulic Oils87
Required Tractor - Weights and Loads88
Calculation Data88
Calculation of the Minimum Ballast Front ( G V Min )89
Calculation of the Actual Total Weight89
Tat)89
H Tat )89
Calculation of the Actual Front Axle Load90
Calculation of the Actual Rear Axle Load T90
Calculation of the Tyre Load Capacity90
Permissible and Actual Values (Table)90
Fitting Advice for the Connection of the Hydraulic Blower Fan Drive91
Circuit Diagram for Hydraulic Blower Fan Drive91
Initial Fitting of92
Putting to Operation93
Coupling and Uncoupling the Machine93
Coupling of the Machine94
Creating Hydraulic Connections96
Connection of the Hydraulic Blower Fan Drive97
Creating Electric Supply Connections97
Connection of the Brake System98
Uncoupling the Machine99
Folding the Machine Wings down and in102
Folding down the Machine Wings102
Folding in Machine Wings104
Removal of the Traffic Safety Board106
Filling the Seed Hopper106
Input of Filling Quantity into the109
Lowering the Pre Emergence Marker into Working Position110
Starting the Operation111
Locking the Star Wheel and Actuating the STOP-Key When the Operation Is Stopped112
Locking the Track Marker Actuation112
Folding in Track Markers at Obstacles113
Visual Inspection of the Distributor Heads113
Sowing in Difficult Soil Conditions113
Turning at the Headlands114
Emptying the Metering Unit or Seed Hopper and Metering Unit115
Finishing Operation in the Field117
Malfunction118
Indication of Low Seed Hopper Contents118
Fault in the Metering System118
Failure of During Operation119
Deviations between the Adjusted and the Actual Seed Rate120
Transport on Public Roads121
Maintenance, Repair and Care Work129
Check List for Maintenance and Care129
Overview - Lubricating Points132
10.1.1.1 Lubricants132
Hydraulic System133
Description of the Hydraulic Hose Assemblies134
Checking and Maintenance Intervals for the Hydraulic Hose Assemblies (Workshop Job)135
Flushing and Calibrating the Balancing System (Professional Workshop Job)137
Emptying the Balancer (Professional Workshop Job)137
Filling and Calibrating the Balancing System (Professional Workshop Job)139
Pressure Reservoir (Professional Workshop Job)143
Service Brake System144
Dual Circuit Air Brake as Part of the Service Brake System145
Air Pressure Reservoir146
Inspection Advice for the Dual Circuit Air Brake System (Workshop Job)147
Leak Test - Quarterly (Workshop Job)147
Checking the Pressure in the Air Pressure Reservoir - Quarterly (Workshop Job)147
Cleaning the Hose Filters- Quarterly (Workshop Job)147
Hydraulic Part of the Service Brake System148
10.4.3.1 Checking the Brake Fluid - Monthly or after Every 50 Hours of Operation148
Maintenance of the Hydraulic Part of the Brake System (Workshop Job)148
Venting the Brake System (Workshop Job)149
10.4.3.4 Brake Fluid150
Track Marker Setting Screw151
Cleaning the Distributor Heads (Workshop Job)151
Setting the Tramline to Another Bout Width (Workshop Job)152
Activate or Deactivate the Shutters (Workshop Job)152
Hydraulic Diagrams154
Hydraulic Diagram Cirrus 3000154
Hydraulic Diagram Cirrus 4000 und 6000156

Brand	Amazone
Model	Cirrus 3000
Category	Farm Equipment
Language	English

Amazone Cirrus 3000 User Manual

Table of Contents

Questions and Answers:

Amazone Cirrus 3000 Specifications

Related product manuals