Putting to operation
Cirrus 3/4/6000 DB2034 08.04
113
7.9 Folding in track markers at obstacles
Fold in the track markers at obstacles to avoid damage
on the track marker when hitting the obstacle. For this
- recall the operation menu in .
- press key (Fig. 182/1) to prevent the machine
and the star wheel from being lifted when the track
marker is lifted. In this case, areas would not be
sown. The symbol (Fig. 182/2) appears in the
operational menu.
- set the control unit 2 to "lifting". The track marker
folds in like when turning at the headlands.
- set the control unit 2 to "lowering, after having
passed the obstacle. The earlier folded in track
marker will fold down again.
- press key (Fig. 182/1) to switch off the
function. The symbol (Fig. 182/2) disappears in the
operation menu.
Fig. 182
7.10 Visual inspection of the distributor heads
Important!
From time to time check the distributor head(s) for pollution from the tractor
seat.
Dirt and seed residue could block the distributor heads. Remove them immediately.
(see chapter 10.6).
7.11 Sowing in difficult soil conditions
Mud holes can be passed and sown by lifting the
machine with the aid of the integrated running gear. In
this way, track markers, star wheel and coulter frame
remain in the working position.
For this
- recall the operation menu in .
- press key (Fig. 183/1). The symbol (Fig.
182/2) appears in the operation menu.
- lift the machine with the aid of control unit 2 without
lifting the machine out of the soil.
- set the control unit 2 to "lowering" after the mud
hole has been passed. The integrated running gear
is retracted.
- press key (Fig. 183/1) to switch off the
function. The symbol (Fig. 183/2) disappears in the
operation menu.
Fig. 183