General safety advice
Cirrus 3/4/6000 DB2034 08.04
17
2.16 Safety symbols and other identifications on the machine
Safety symbols
The following safety symbols on the machine warn about residual danger which cannot
constructively be remedied. The column Picture-No. and explanation provides you with
explanations and relevant safety hints for the safety symbols.
Always keep all safety symbols on the mounted sprayer clean and in well readable
condition! Unlesbare Sicherheits-Symbole sind über den Handel zu bestellen und zu
erneuern.
The number on the safety symbol is the order number.
Important!
Always keep all safety symbols on the mounted sprayer clean and in well
readable condition! Replace not readable safety symbols. Ask your dealer for
replacement safety symbols. The Picture No. on the safety symbol is the order
number.
Picture No. and Explanation Safety symbol
MD076
Only operate the machine with all guards fitted.
Never remove guards whilst the motor is running.!
Switch off tractor motor and remove ignition key
before removing the guard.
Fig. 1
Picture No. and Explanation Safety symbol
MD078
Danger of squeezing. Never reach into the zone as
long as parts are still moving.
Advise people to leave the danger area!
Fig. 2
To Next Page
Loading...
Need help?
General
