Putting to operation
106
Cirrus 3/4/6000 DB2034 08.04
7.3 Removal of the traffic safety board
Remove the transport safety board (Fig. 168/1):
- Slacken the lynch pin (Fig. 168/2) and deposit the
transport safety board at the side of the field.
Fig. 168
7.4 Filling the seed hopper
Filling the seed hopper:
- couple the Cirrus on to the tractor (see chapter 7.1).
- Determine the metering wheel(s) according to table (Fig. 78) and fit.
Danger
Only fill the seed hopper in the field.
The transport of the machine with filled hopper is prohibited on all roads and
ways. The brake system is only designed for the empty machine.
Before filling the seed hopper, stop the tractor engine, apply the parking brake
and remove the ignition key.
1. Hold the stair step and remove the lynch pin (Fig.
169/1).
Caution!
Danger of squeezing when lowering the
star step.
2. Lower the stair step.
Fig. 169
To Next Page
Loading...
Need help?
General
