Putting to operation
Cirrus 3/4/6000 DB2034 08.04
117
7.14 Finishing operation in the field
When the operation has been finished get the machine into the transport position:
- Switch off blower fan.
- Lift disc harrow.
- Empty the seed hopper according to chapter 7.13.
- If it is intended to prevent the tramline counter from shifting on when the machine is
raised, first press the STOP key .
- Actuate control unit 2
- Lift the machine
- Lift the star wheel
- Lift the track marker
- Lift the coulter frame (with the Low-Lift-Function switched off).
- If it is intended to lower the machine with its wings folded in, lock the star wheel
(see chapter 7.7), to prevent the star wheel from an unintended lowering which
would result in an undesired shifting on of the tramline counter.
- Fold in the Cirrus 4000/6000 according to chapter 7.2.1.
Important!
The tractor control units should only be actuated within the tractor cab.
To Next Page
Loading...
Need help?
General
