Amazone Cirrus 3000 User Manual

Putting to operation
116
Cirrus 3/4/6000 DB2034 08.04
- Open the injector sluice flap (Fig. 188/1) to allow
the seed to flow into the seed collection trays.
Danger!
Danger of squeezing
when the injector sluice flap (Fig. 188/1)
is opened or closed!
Only hold the injector sluice flap on its
strap (Fig. 188/1). Otherwise danger of
injury when the sprung loaded flap will
bang.
Never hold your hand between injector
sluice flap (Fig. 188/1) and injector
sluice!
Fig. 188
- Turn the handle (Fig. 189/1) to open residue
emptying flap (Fig. 189/2).
Fig. 189
- In the same way as for the calibration test, turn the
star wheel (Fig. 190to the left until the metering
wheels and the metering units are completely
empty.
For full metering, briefly run the electric motor.
- For the complete cleaning when changing the seed
type, remove the metering wheels (see chapter
5.1.2) and clean together with the metering unit.
- Close the residue emptying flap (Fig. 189/2) and
affix the empty seed collecting tray on the seed
hopper.
Fig. 190
Important!
Seed residue in the metering units might swell and germinate when the
metering units have not been emptied completely.
This will cause blockage of the metering wheel rotation and result in damage to
the drive.

Amazone Cirrus 3000 Specifications

General

Brand	Amazone
Model	Cirrus 3000
Category	Farm Equipment
Language	English