General safety advice
22
Cirrus 3/4/6000 DB2034 08.04
2.17 Danger when not adhering to the safety advice
Not adhering to the safety advice
• may result in endangering persons, also the environment and also the machine
itself
• may result in the rejection of any claim for damage
Not paying attention to the safety advice may cause the following risks:
• Danger to persons not excluded from operational areas
• Danger to persons through physical or chemical contact
• Failure of important functions within the machine
• Failure of carrying out prescribed measures of maintenance and repair
• Danger to persons, or the environment by leaking hydraulic oil.
2.18 Safety conscious operation
Besides the safety advice in this operator's manual additionally adhere to the EC
guide line for the use of implements 89/655/EWG and the national operation safety
and accident prevention advice of the authorised trade association are binding.
Adhere to the safety advice on the decals on the machine.
When travelling on public roads observe the traffic regulations in force in your country.
2.19 Safety advice for the operator
Warning!
Basic principle:
Always check traffic and operational safety before putting the machine to
operation!
2.19.1 General safety and accident prevention advice
• Adhere to the general rules of health- and safety precautions besides the
advice in this instruction manual!
• The fitted warning- and advising decals give important hints for a safe
operation. Adhering to them protects your own safety!
• When making use of public roads adhere to applicable traffic rules!
• Become acquainted with the machines controls and functions before beginning
the operation. Doing this during operation would be too late!
• The operator should wear close-fitting clothes.
• Avoid danger of fire by keeping the machine clean!
• Before beginning to move, check surrounding area (children etc). Ensure
sufficient visibility!
• Sitting or standing on the implement during operation or during transport is not
permissible!