Amberg Technologies GRP System FX - User Manual for the GRP System FX

User manual
User manual for the GRP System FX
This user manual gives you an introduction to the successful use of the GRP System FX
in its various configurations. Please note that due to the large amount of different system
configurations, this manual may not show all of them with correct graphics, illustrations and
textual descriptions. We have tried to simplify the manual as much as possible for easier
reading.
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Laser radiation
■
The Profiler FX (100, 110 and 120) is a class 2 laser product in accordance with ISO DIN
EN 60825-1 and IEC 60825-1
■
The Profiler 5002 and Profiler 5003 is a class 3R laser product in accordance with ISO DIN
EN 60825-1 and IEC 60825-1
■
The Profiler 5033 is a class 1 laser product in accordance with ISO DIN EN 60825-1 and
IEC 60825-1
■
The Profiler 6012 without red laser is a class 1 laser product in accordance with ISO DIN
EN 60825-1 and IEC 60825-1
■
The Profiler 6012 with red laser (for marking purpose) is a class 3R laser product in
accordance with ISO DIN EN 60825-1 and IEC 60825-1
■
The Imager 5016 is a class 1 laser product in accordance with ISO DIN EN 60825-1 and
IEC 60825-1
Please carefully observe the safety measures indicated in the corresponding manuals.
© Amberg Technologies AG, 2023 Page 7 of 114