Amberg Technologies GRP System FX - Profiler FX; General; Disto Den-10-500; Transport Case

User manual Technical data
11.3 Profiler FX
11.3.1 General
Construction solid light metal chassis and casing
Protection against dust and water spray, IP 65
Weight 4.280 kg
Size 365 x 100 x 240 mm
Operating environment -10 °C to 50 °C, 80 % relative humidity, non condensing,
elevation up to 4000 metres
Storage environment -25 °C to 70 °C, 85 % relative humidity, non-condensing
Angle resolution 320'000 pulses per 360°, incremental
Min. servo increment 320'000 pulses / 360°
Measurement domain full 360°
Power supply 12 V DC (±10 %) / max. 2 A, on average < 0.6 A
Measurement units 400 gon, 360° decimal, 360° sexagesimal, 2xPI radian
Display 128 x 64 pixel, graphics capability, automatic temperature
compensation
Keyboard 7 rubber buttons with discrete pressure points for comfortable
operation
Servo dial self-resetting, for servomotor driven guidance of vertical axis.
11.3.2 DISTO DEN-10-500
Typical measuring accuracy ±1 mm
Typical repeatability ±0.3 mm
Measuring range on natural
surfaces
0.05 to ~100 m
Measuring range on reflecting
target plate
~0.5 to 500 m
Diameter laser dot 5 m: 4 mm
10 m: 8 mm
50 m: approx. 28 mm x 14mm
Time for measurement 0.04 sec to approx. 3 sec*
Power Supply DC 9 V ... 30 V
Power Consumption 0.15 A @ 24 VDC
Protection against ingress of dust and water spray, IP 65
Temperature range Operation Single measurement: -10° C to 50° C
Operation Continuous measurements -10° C to 45° C
Storage: -40° C to 70° C
* The Measuring time depends on the surface of the target and can last up to 3 seconds.
11.3.3 Transport case
© Amberg Technologies AG, 2023 Page 95 of 114