Ametek Sorensen XG - Page 338

A-34
M370430-01 Rev B
SCPI Command Reference
Table A-10 Status Commands (Continued)
Query
Questionable
Status Voltage
Event Register
[:]STATus[<channel>]:QUEStionable
:VOLTage[:EVENt]?
Query the Questionable Volt
Event Register. See Table
5-15 on page 5-49.
Yes
Set
Questionable
Status Voltage
Negative
Transition
Register
[:]STATus[<channel>]:QUEStionable
:VOLTage:NTRansition
Access the Questionable
Voltage Negative Trans Filter
Register. See Table 5-15 on
page 5-49.
?|<Transition Flags -
(0–65535)>
Yes
Set
Questionable
Status Voltage
Positive
Transition
Register
[:]STATus[<channel>]:QUEStionable
:VOLTage:PTRansition
Access the Questionable
Voltage Positive Trans Filter
Register. See Table 5-15 on
page 5-49.
?|<Transition Flags -
(0–65535)>
Yes
Query the
Standard Event
register (ESR?)
[:]STATus[<channel>]:STANdard[:EVENt]?
See Table 5-10 on 5-37. Same
as *ESR.
Query the Standard
Event Status Register
(SERS).
Yes
Enable the
Standard Event
register
(*ESE,*ESE? )
[:]STATus[<channel>]:STANdard:ENABle
Access the Standard Event
Status Register (SERS)
Enable Flags. See Table 5-10
on page 5-37. Same as *ESE.
?|<Enable Flags - (0
–255)>
Yes
Query the
Status Byte
(*STB)
[:]STATus[<channel>]:SBYTe[:EVENt]?
Query the Status Byte. See
Table 5-10 on page 5-37.
Yes