Ametek Sorensen XG - Page 339

M370430-01 Rev B
A-35
A
SCPI Command Reference
Table A-10 Status Commands (Continued)
Service
Request
Enable
(*SRE,*SRE
?)
[:]STATus[<channel>]:SREQuest:ENABle
Access Service Request
Enable Command.
?|<Enable Flags - (0 –
255)>
Yes
[:]STATus[<channel>]:CLEar
Clears all the Status Data
Structures.
Table A-11 Protection Commands
Function
SCPI Command
Description
Parameter and
Range
Query
Enable the
interlock
functionality.
[:]SENSe[<channel>]:PROTection:INTerlo
ck[:STATe]
Control the Enable/Disable
state of the Interlock System.
?|ON|OFF
Yes
Table A-12 Auto Sequence Commands
Function
SCPI Command
Description
Parameter and Range
Query
Delete all
sequences.
[:]PROGram[<channel>]:DELete:ALL
Erases the sequence
currently in memory.
N/A
Change Auto
Sequence
operating state.
[:]PROGram[<channel>]:STATe
Access to the run state of
the Sequence.
?|RUN|STOP|PAUSE
Yes
Program
selected
sequence end
action.
[:]PROGram[<channel>]:REPeaT
Sets the number of times to
repeat the sequence.
?|<Repeat count (1–
65534)>INFinity
Yes