Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the INPUTS tab to access the inputs setup page.
3. In the left side toolbar, select an input to access the selected input setup page.
4. Click on the Auto Detect button to start the signal auto-detection process.
To select a specific signal type on a plug:
Front Panel
1. Enter the INPUTS menu on the Front Panel interface.
2. Scroll down and select an input to access the selected input setup menu.
TIP: Double-click on an INPUT SELECTION button to shortcut to the input setup menu directly.
3. Select the plug settings to access the input plug settings menu.
4. Select Type to select the signal type/color space for the plug.
List of possible input signal types (analog plugs):
To Next Page
Loading...
Need help?
General
