Related topics:
• Sharpness level
• User gain
To adjust the user gain:
Front Panel
1. Enter the INPUTS menu on the Front Panel interface.
2. Scroll down and select an input to access the selected input setup menu.
TIP: Double-click on an INPUT SELECTION button to shortcut to the input setup menu directly.
3. Select Image Settings to access the input image settings menu.
4. Select Color Adjustments to access the image colorimetry adjustments.
5. Select a R Gain, G Gain or B Gain to adjust the red, green and blue gain, respectively.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the INPUTS tab to access the inputs setup page.
3. In the left side toolbar, select an input to access the selected input setup page.
4. Select the Image tab to access the input image settings page.
5. Under USER GAIN, click and drag the Red, Green or Blue control bar to adjust the red, green and
blue gain, respectively.
SEE also: Colorimetry
Related topics:
• Colorimetry adjustments
To Next Page
Loading...
Need help?
General
