StatisticsStatistics
The selected check boxes correspond to the columns currently shown in the
results list on the SummarySummary screen. Note that the check boxes are placed under
categories.
Frame statisticsFrame statistics
IP size distributionIP size distribution
MPLS statisticsMPLS statistics
IP statisticsIP statistics
IPv4 statisticsIPv4 statistics
IPv6 statisticsIPv6 statistics
TCP statisticsTCP statistics
UDP statisticsUDP statistics
Select/Clear allSelect/Clear all
To select all check boxes in the dialog box, touch the Select AllSelect All button.
To clear all check boxes in the dialog box, touch the Clear AllClear All button.
66..44..33..66 IEEE1588v2 LogIEEE1588v2 Log
If Ext. logExt. log is selected in IEEE1588v2 screen of Ethernet Frame Setup, the
IEEE1588v2 LogIEEE1588v2 Log button appears in the navigation area. Refer to IEEE1588v2
Log in "BERT" for the operation.
66..44..33..77 Event LogEvent Log
Touching the Event LogEvent Log button in the navigation area displays the screen
providing the event log data. Refer to Event Log of SDH/SONET/PDH/DSn
BERT application.
66..44..33..88 StatisticsStatistics
Touching the StatisticsStatistics button in the navigation area displays the screen
providing the statistics data. Refer to Statistics of Mon/Gen for the operation.
The frame count result in the Statistics screen may not match to the result in the
Summary screen, because the measurement start time and the stop time are different
between Summary screen and Statistics screen.
To Next Page
Loading...
