Anritsu MT1810A - Page 129

7.2 Common Commands
7-11
7
Remote Commands
:SYSTem:UNIT? <numeric>[,<usb>]
Parameter <numeric>=<NR1 NUMERIC PROGRAM DATA>
1 to 4 Mainframe number
"1" for the MP1800A, "1 to 4" for the MT1810A.
<numeric>=<NR1 NUMERIC PROGRAM DATA>
1 to 127 Mainframe number
Response <mainframe>=
<unit>,<serial>,<mver>,<hver>,<opt1>,<sbver>,<saver>,<opt2>
<unit>=<STRING RESPONSE DATA>
XXXXXXXXX Model name Example: MP1861A
See Table 7.2.1-2 “Option Character
Correspondence Table”.
Note:
NONE is output if no module is installed.
<serial>=<STRING RESPONSE DATA>
XXXXXXXXXX 0000000000 to 9999999999
Mainframe serial number
Note:
Alphabetic characters may be included.
<mver>=<STRING RESPONSE DATA>
XXXX.XX.XX 1.00.00 to 9999.99.99
Main application software version
<hver>=<STRING RESPONSE DATA>
XXXX.XX.XX 1.00.00 to 9999.99.99
Mainframe hardware version
<opt1>=<STRING RESPONSE DATA>
OPTXXX For option number, see Table 7.1.1-2 “Option
character correspondence table”.
Note:
All installed options are output.
NONE is output if no option is installed.
<sbver>=<STRING RESPONSE DATA>
XXXX.XX.XX 1.00.00 to 9999.99.99
Sub application software version
(Boot part)
<saver>=<STRING RESPONSE DATA>
XXXX.XX.XX 1.00.00 to 9999.99.99
Sub application software version
(Application part)
<opt2>=<STRING RESPONSE DATA>