Anritsu MT1810A - Page 130

Chapter 7 Remote Commands
7-12
Function Queries the mainframe information including model and serial number.
Example To query the mainframe information including model and serial number for
USB1:
> :SYSTem:UNIT? 1,7
<
"MP1861A,6201234568,1.00.00,1.00.00,OPT301,1.00.00,1.00.00"
UNT? <numeric>[,<usb>]
Parameter <numeric>=<NR1 NUMERIC PROGRAM DATA>
1 to 4 Mainframe number
"1" for the MP1800A, "1 to 4" for the MT1810A when querying USB.
<numeric>=<NR1 NUMERIC PROGRAM DATA>
1 to 127 Mainframe number
Response <mainframe>,
<mainframe>=<module>,<serial>,<mver>,<hver>,<opt1>,<sbver>,
<saver>,<opt2>
<unit>=<STRING RESPONSE DATA>
XXXXXXXXX Model name Example: MP1800A and
MT1810A
Refer to Table 7.2.1-2 “Option Character
Correspondence Table”.
Note:
NONE is output if no module is installed.
<serial>=<STRING RESPONSE DATA>
XXXXXXXXXX 0000000000 to 9999999999
Mainframe serial number
Note:
Alphabetic characters may be included.
<mver>=<STRING RESPONSE DATA>
XXXX.XX.XX 1.00.00 to 9999.99.99
Main application software version
<hver>=<STRING RESPONSE DATA>
XXXX.XX.XX 1.00.00 to 9999.99.99
Mainframe hardware version
<opt1>=<STRING RESPONSE DATA>
OPTXXX Option number
Refer to Table 7.2.1-2 “Option Character
Correspondence Table”.
Note:
All installed options are output.
NONE is output if no option is installed.