Anritsu MT1810A - Page 162

Chapter 7 Remote Commands
7-44
Table 7.4.2.1-1 Eye Margin Measurement Setting Commands
No. Item Command
[1] Set All :SENSe:MEASure:EMARgin:MARGin:ASLot
[2] Reset All :SENSe:MEASure:EMARgin:MARGin:RSLot
[3] Slot :SENSe:MEASure:EMARgin:MARGin:SLOT
:SENSe:MEASure:EMARgin:MARGin:SLOT?
[4] Start :SENSe:MEASure:STARt
[5] Stop :SENSe:MEASure:STOP
[6] No label
(Query for measurement
state)
:SENSe:MEASure:EMARgin:STATe?
[7] Error Threshold :SENSe:MEASure:EMARgin:MARGin:THReshold
:SENSe:MEASure:EMARgin:MARGin:THReshold?
[8] Fine/Coarse :SENSe:MEASure:EMARgin:MARGin:RESolution
:SENSe:MEASure:EMARgin:MARGin:RESolution?
[9] Auto Search :SENSe:MEASure:EMARgin:MARGin:ASEarch
:SENSe:MEASure:EMARgin:MARGin:ASEarch?
[10] Selection of
measurement time
display
:SENSe:MEASure:EMARgin:TIME
:SENSe:MEASure:EMARgin:TIME?
[11] Query for date and time :SENSe:MEASure:EMARgin:DTIMe?
[12] Query for measurement
start time
:SENSe:MEASure:EMARgin:STARt?
[13] Query for measurement
elapsed time
:SENSe:MEASure:EMARgin:ELAPsed?
[14] Query for measurement
result
:CALCulate:DATA:EMARgin?
[15] No label
(Query for measurement
status)
:CALCulate:DATA:EMARgin:STATus?
:SENSe:MEASure:EMARgin:MARGin:ASLot
Function Selects all Eye Margin measurement slots to be set to ON.
Example > :SENSe:MEASure:EMARgin:MARGin:ASLot
Compatibility Incompatible with existing models.
:SENSe:MEASure:EMARgin:MARGin:RSLot
Function Selects all Eye Margin measurement slots to be set to OFF.
Example > :SENSe:MEASure:EMARgin:MARGin:RSLot
Compatibility Incompatible with existing models.