Anritsu MT1810A - Page 194

Chapter 7 Remote Commands
7-76
: SENSe:MEASure:EDIagram:DIAGram:STARt
Function Starts the Eye Diagram measurement.
Example > :SENSe:MEASure:EDIagram:DIAGram:STARt
Compatibility Incompatible with existing models.
: SENSe:MEASure:EDIagram:DIAGram:STOP
Function Stops the Eye Diagram measurement.
Example > :SENSe:MEASure:EDIagram:DIAGram:STOP
Compatibility Incompatible with existing models.
: SENSe:MEASure:EDIagram:STATe?
Response <numeric>=<NR1 NUMERIC RESPONSE DATA>
1 Measurement has been started.
0 Measurement has been stopped.
–1 Measurement has failed.
Function Queries the Eye Diagram measurement status.
Example > :SENSe:MEASure:EDIagram:STATe?
< 1
Compatibility Incompatible with existing models.
:SENSe:MEASure:EDIagram:TIME <type>
Parameter <type>=<CHARACTER PROGRAM DATA>
DTIMe Current date and time
STARt Measurement start time
ELAPsed Elapsed time based on the measurement period
Function Selects the Eye Diagram measurement time display type.
Example To set the Eye Diagram measurement time display type to measurement
start time (Start Time):
> :SENSe:MEASure:EDIagram:TIME STARt
Compatibility Incompatible with existing models.
:SENSe:MEASure:EDIagram:TIME?
Response <type>=<CHARACTER RESPONSE DATA>
DTIMe Current date and time
STARt Measurement start time
ELAPsed Elapsed time based on the measurement period
Function Queries the Eye Diagram measurement time display type.
Example > :SENSe:MEASure:EDIagram:TIME?
< STAR
Compatibility Incompatible with existing models.