Anritsu MT1810A - Page 195

7.4 Automatic Measurement Commands
7-77
7
Remote Commands
:SENSe:MEASure:EDIagram:DTIMe?
Response <year>=<NR1 NUMERIC RESPONSE DATA>
2000 to 2036 Year 2000 to 2036
<month> = <NR1 NUMERIC RESPONSE DATA>
1 to 12 January to December
<day> = <NR1 NUMERIC RESPONSE DATA>
1 to 31 1st to 31st
<hour> = <NR1 NUMERIC RESPONSE DATA>
0 to 23 0 to 23 hours
<minute> = <NR1 NUMERIC RESPONSE DATA>
0 to 59 0 to 59 minutes
<second> = <NR1 NUMERIC RESPONSE DATA>
0 to 59 0 to 59 seconds
Function Queries the current date and time during Eye Diagram measurement.
Example > :SENSe:MEASure:EDIagram:DTIMe?
< 2012,4,1,23,59,59
Compatibility Incompatible with existing models.
:SENSe:MEASure:EDIagram:STARt?
Response <year>=<NR1 NUMERIC RESPONSE DATA>
0, 2000 to 2036 Year 2000 to 2036
<month> = <NR1 NUMERIC RESPONSE DATA>
0 to 12 January to December
<day> = <NR1 NUMERIC RESPONSE DATA>
0 to 31 1st to 31st
<hour> = <NR1 NUMERIC RESPONSE DATA>
0 to 23 0 to 23 hours
<minute> = <NR1 NUMERIC RESPONSE DATA>
0 to 59 0 to 59 minutes
<second> = <NR1 NUMERIC RESPONSE DATA>
0 to 59 0 to 59 seconds
Note:
The following is output when no measurement is performed:
< 0,0,0,0,0,0
Function Queries the Eye Diagram measurement start time (Start Time).
Example > :SENSe:MEASure:EDIagram:STARt?
< 2012,4,1,23,59,59
Compatibility Incompatible with existing models.