1-16 Secure Environment Workplace General Information
1-12 PN: 10580-00301 Rev. D MS20xxB UG
Recommended Usage in a Secure Environment
Set the VNA Master to save files to an external USB Flash drive:
1. Attach the external Flash drive and turn on the instrument.
2. Press the Shift button then the File (7) button.
3. Press the Save soft key (submenu key).
4. Press the Change Save Location soft key, then select the USB drive with the
rotary knob, Up/Down arrow keys, or the touchscreen.
5. Press the Set Location soft key.
The external USB drive is now the default location for saving files.
Note
Not all after-market USB drives are compatible with the VNA Master. Many drives
come with a second partition that contains proprietary firmware. This partition must
be removed. Only one partition is allowed. Refer to the individual manufacturer for
instructions on how to remove it. You might also try reformatting a drive that
contains a single partition using FAT32 format.
To Next Page
Loading...
Need help?
General
