Quick Start Guide 3-5 Spectrum Analyzer
MS20xxB UG PN: 10580-00301 Rev. D 3-11
Single Limit Line
Press the Limit menu key to display the Limit menu.
1. Press the Limit (Upper / Lower) soft key to select the desired limit line, Upper or Lower.
2. Activate the selected limit line by pressing the On Off soft key so that On is underlined.
3. Press the Limit Move soft key to display the Limit Move menu. Press the first Move Limit
soft key and use the arrows keys, rotary knob, or keypad to change the dBm level of the
limit line.
4. Press the Back soft key to return to the Limit menu.
5. If necessary, press the Set Default Limit soft key to redraw the limit line in view.
Create a Limit Envelope
1. Press Shift then Limit (6) to open the Limit menu.
2. Press Limit Envelope.
3. Press the Create Envelope key.
Figure 3-5. Limit Envelope
To Next Page
Loading...
Need help?
General
