4-3 Managing Files File Management
4-4 PN: 10580-00301 Rev. D MS20xxB UG
Recall Files
The recall menu enables you to view all of the Measurement and Setup files in the internal
memory and in an external USB flash drive.
You can sort the recall menu by name, date, or type. You can also choose to view only
measurement files or setup files by pressing File Type on the Recall dialog box and selecting
the file type that you want to view.
Recall a Measurement
From the File menu, press the Recall Measurement soft key (submenu key), select the
measurement with the touchscreen, rotary knob, or the Up/Down arrow keys, and then press
Enter.
Recall a Setup
Press the Recall soft key. Confirm that the file type is Setup or All. Select the setup file (.stp)
with the touchscreen, rotary knob, or the Up/Down arrow keys, and then press Enter.
Recall Dialog Box
The Recall dialog box (Figure 4-2) opens previously saved measurements and setups. Refer
to the “Recall Menu” on page 4-12 for additional information.
Figure 4-2. Recall Dialog Box
To Next Page
Loading...
Need help?
General
