Anritsu VNA Master MS2024B - Chapter 5-System Operations; Introduction

MS20xxB UG PN: 10580-00301 Rev. D 5-1
Chapter 5 — System Operations
5-1 Introduction
This chapter describes the VNA Master system operations.
• “System Menu Group Overview” on page 5-2
• “System Menu” on page 5-3
• “Preset Menu” on page 5-11
• “Power On Self Test” on page 5-12
• “Updating the VNA Master Firmware” on page 5-12
The other menus (Sweep, Measure, Trace, and Limit) are described in the Measurement
Guides that are listed in Appendix A.