System Operations 5-9 Preset Menu
MS20xxB UG PN: 10580-00301 Rev. D 5-11
5-9 Preset Menu
Key Sequence: Shift, Preset (1)
Preset: Press this soft key to reset the instrument to the default starting
conditions.
Save Setup: Press this soft key to open the Save dialog box (Figure 4-1) to
name and save the current operating settings, allowing them to be recalled
later to return the instrument to the state it was in at the time the setup was
saved.
The saved setup can be named using the touch screen keyboard. Use the
Caps key to select an upper case letter. Use the Left/Right directional
arrows to move the cursor position. Press Enter to save the setup.
Note: Set the File type as Setup. Refer to “Save Menu” on page 4-9 for
details.
Recall Setup: Press this soft key to select and recall a previously stored
instrument setup using the “Recall Menu” on page 4-12. Use the rotary
knob, the Up/Down arrow keys, or the touchscreen to highlight the saved
setup, and press Enter. All current instrument settings are replaced by the
stored setup information.
Figure 5-11. Preset Menu
Recall
Setup
Preset
Save
Setup
Preset
To Next Page
Loading...
Need help?
General
