System Operations 5-11 Updating the VNA Master Firmware
MS20xxB UG PN: 10580-00301 Rev. D 5-13
7. Press Enter to begin the firmware update process. To abort the process, press Esc, then
choose another analyzer mode or power down.
8. The Firmware Update dialog will query you to confirm the process by pressing Enter to
continue or by pressing Esc to abort.
9. Press Enter, and the firmware update process begins, and the Firmware Update dialog
displays the following message:
Updating firmware. Please Wait.
10. When complete, the instrument restarts.
To Next Page
Loading...
