•
Warm up the crankcase properly before fitting each bearing.
BEARING REFITTING - TIMING SHAFT
•
Working on the flywheel side and on
the clutch side, refit the bearings using
the specific punches.
Specific tooling
9100893 Left timing gear punch
9100889 Timing gear crankshaft punch
•
Refit the grub screw and the corre-
sponding plate.
GEAR BEARING REFITTING
•
Refit the bearings using the specific
punches.
Specific tooling
9100886 Secondary shaft/right side - Main
shaft/left side
Engine MXV 450
ENG - 136
To Next Page