•
Refit the lock screws.
GEAR SECONDARY SHAFT BEARING REFIT-
TING
•
Refit the bearing using the specific
punch.
CAUTION
CHECK THAT THE PLATE ADJUSTABLE SUPPORT IS
FIRMLY STOPPED AND WARM UP THE BEARING COU-
PLING AREAS PROPERLY.
Specific tooling
9100885 Main shaft/ right side - secondary
shaft/left side
•
Position the plates and tighten the
screws.
•
Fit a new oil seal using the specific
punch at controlled driving.
Specific tooling
9100894 Secondary shaft oil seal punch
MXV 450 Engine
ENG - 137
To Next Page
Loading...
