Arturia SPARK - Delay Parameters; Distortion Parameters

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
54
Delay parameters
1
Delay output (Link/Unlink).
Apply (Disable) same values for right and left
2
Set time for left and/or right channel
3
Set Feedback for left/right channel
4
Set ping-pong mode on/off (Can be turned on only if "Link" is
off.)
5
Set Damping value
6
Set tempo sync on/off
A delay repeats a sound, giving it more space and depth. Linking channels applies the
left channel’s delay time and feedback to the right channel. For separate parameters on
both channels Link should be deactivated. Ping Pong alternates the delayed signal
between the left and right channel (for an increased stereo effect), and dampening
reduces high frequencies by adding a Lowpass filter to the feedback chain.
Distortion parameters
1
Change Distortion type
2
Change Drive amount
3
Change Output gain