Arturia SPARK - Controlling Spark an External MIDI Controller; Assign a MIDI Note to Pads; Assign a MIDI Note to Bank Buttons; Assign a MIDI Note to Pattern Buttons

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
88
5.
Choose Touch Pad MIDI Message X or Y Maximum Value
0 to 127 (should be > minimum value)
7.4 CONTROLLING SPARK AN EXTERNAL MIDI CONTROLLER
7.4.1 Assign a MIDI note to pads
Click holding [Cmd] on Mac / [Ctrl] on Windows on [Pads] #115 to #122 and press
button or key on your MIDI controller.
7.4.2 Assign a MIDI note to bank buttons
Same as previous on corresponding button/pad.
7.4.3 Assign a MIDI note to pattern buttons
Same as previous on corresponding button/pad.
7.4.4 Assign a MIDI note to loop on button
Same as previous on corresponding button/pad.
7.4.5 Assign a MIDI CC to Loop divide knob
Click holding [Cmd] on Mac / [Ctrl] Win on [Loop] #49 and move knob or fader on your
MIDI controller.
7.4.6 Assign a MIDI CC to Loop Move knob
Same as previous on corresponding knob.
7.4.7 Assign a MIDI CC to shuffle knob
Same as previous on corresponding knob.
7.4.8 Assign a MIDI CC to master Volume knob
Same as previous on corresponding knob.
7.4.9 Assign a MIDI CC to cutoff/res/Pan/Aux1/Aux2/Volume knobs
Same as previous on corresponding knob.
7.4.10 Assign a MIDI CC to instrument parameters knobs
Same as previous on corresponding knob.