Arturia SPARK - Edit Instrument Parameter Knob Window; Edit Clickable Knob Window; The Jog Dial (Wheel)

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
86
7.3.5 Edit Instrument parameter knob window
1.
Edit Instrument parameter knob 1 to 8 MIDI Message
2.
Choose Knob MIDI Message Type
(Choice between CC and Off)
3.
Choose Knob MIDI Message Number
(0 to 127)
4.
Choose Knob MIDI Message Channel
(1 to 16)
5.
Choose Knob MIDI Message Mode
(Choice between Absolute, Relative1, Relative2, Relative3)
6.
Choose Knob MIDI Message Min Value. 0 - 127
(should be < max value)
7.
Choose Knob MIDI Message Max Value. 0 - 127
(should be > min value)
8.
Choose Knob MIDI Message Acceleration
(Choice between None, Slow and Fast - not available for encoder
with detent: Encoders with detent are Move, Jog Dial, Loop)
7.3.6 Edit Clickable knob window
You will find only 2 clickable buttons on SPARK's Hardware:
7.3.6.1 The Jog Dial (Wheel)
1.
Choose MIDI Message Type
(Choice between CC, Note, Start, Stop, Continue, Program Change,
Channel Pressure, Aftertouch and Off).
2.
Choose Action on MIDI Message
(Choice between Push/release)