Arturia SPARK - The Move Button (Loop Move); Edit Touch Pad Window

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
87
7.3.6.2 The Move button (Loop Move)
1.
Choose MIDI Message Type
(Choice between CC, Note, Start, Stop, Continue, Program Change,
Channel Pressure, Aftertouch and Off).
2.
Choose Switch MIDI Message Number
(0 to 127)
3.
Choose Switch MIDI Message Channel
(1 to 16)
4.
Choose Switch MIDI Message Mode.
(Choice between Toggle, Trigger, Gate, Inc, Gate and Toggle).
5.
Choose Knob MIDI Message Min Value. 0-127
(should be < max value)
6.
Choose Knob MIDI Message Max Value. 0-127
(should be > min value)
7.
Choose Switch MIDI Message Action On. Choice between Push or Release
(Not available in Gate Mode)
8.
Choose Action on.
(Choice between Push/Release)
7.3.7 Edit Touch pad window
1.
Choose Touch Pad MIDI Message Type
(Choice between CC and Off)
2.
Choose Touch Pad MIDI Message Number
(0 to 127)
3.
Choose Touch Pad MIDI Message Channel
4.
Choose Touch Pad MIDI Message X or Y Minimum Value
0 to 127 (should be < maximum value)