Arturia SPARK - Use in Logic Pro; If an Arturia Plug-In Poses Problem in Logic, Start by Checking that this Plug-In Has Passed the Compatibility Test, and that It Is Actually Selected; Multi Output Mode; Stereo Mode

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
74
6.4.2 Use in Logic Pro
From version 7 and on, Logic Pro features an Audio Unit plug-in manager. To launch the
Audio Unit plug-in manager, click on the menu Preferences > Audio Units Manager.
This Manager will show you the list of available plug-ins, test their compatibility with
Logic, and then allow you to activate or de-activate them.
If an Arturia plug-in poses problem in Logic, start by checking that this plug-in has
passed the compatibility test, and that it is actually selected.
6.4.2.1 Stereo Mode
Select an Instrument track. On the mixer portion of the corresponding track, click on the
button “I/O” to obtain the list of plug-ins, then select AU Instruments > Arturia > Spark
> Stereo.
6.4.2.2 Multi Output Mode
To use the separate outputs:
Select an Instrument track. On the portion of the mixer corresponding to the selected
track, click on the button “I/O” to obtain the list of plug-ins, then select AU Instruments
> Arturia > Spark > Multi Output (16xStereo).