EasyManua.ls Logo

Arturia SPARK - Page 6

Arturia SPARK
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ARTURIA SPARK CREATIVE DRUM MACHINE USER’S MANUAL
6
PRECAUTIONS INCLUDE, BUT ARE NOT LIMITED TO, THE FOLLOWING:
Read and understand all the instructions.
Always follow the instructions on the instrument.
Before cleaning the instrument, always remove the electrical plug from the
outlet, as well as the USB cable. When cleaning, use a soft and dry cloth. Do
not use gasoline, alcohol, acetone, turpentine or any other organic solutions;
do not use a liquid cleaner, spray or cloth that's too wet.
Do not use the instrument near water or moisture, such as a bathtub, sink,
swimming pool or similar place.
Do not place the instrument in an unstable position where it might
accidentally fall over.
Do not place heavy objects on the instrument. Do not block openings or
vents of the instrument; these locations are used for air circulation to prevent
the instrument from overheating. Do not place the instrument near a heat
vent or any place of poor air circulation.
Only use the recommended specified AC adaptor (9 Vdc, 800 mA)
Make sure the line voltage in your location matches the input voltage
specified on the AC power adaptor.
Do not open and insert anything into the instrument that may cause a fire or
electrical shock.
Do not spill any kind of liquid onto the instrument.
Always take the instrument to a qualified service center. You will invalidate
your warranty if you open and remove the cover, and improper assembly
may cause electrical shock or other malfunctions.
Do not use the instrument with thunder and lightning present; otherwise it
may cause long distance electrical shock.
Do not expose the instrument to hot sunlight.
Do not use the instrument when there is a gas leak nearby.
Arturia is not responsible for any damage or data loss caused by improper
operations to the instrument.
HANDLING CD-ROMS:
Avoid touching or scratching the shiny underside (encoded surface) of the disc. A
damaged or dirty CD-ROM disc may not read properly. Keep your CD-ROMs clean, using
a commercially available CD cleaner.

Table of Contents

Related product manuals