VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 104 of 308 Page 104 of 308
8. Move to, and scroll the configuration options for the selected switch until the required option is displayed
in the right field:
8. Move to, and scroll the configuration options for the selected switch until the required option is displayed
in the right field:
Switch #1 [Not-Conf] Switch #1 [Not-Conf]
• [Not-conf] • [Not-conf]
The key-switch is not used. The key-switch is not used.
• [Listen-in] • [Listen-in]
Configures the selected switch as Listen-in switch. Configures the selected switch as Listen-in switch.
• [{Security}] • [{Security}]
This is an indicator that the selected key-switch is configured as a Security switch for a specific
button in the ‘Security’ menu, see Section “7.3.4.5 Security Key-switch Configuration”. This function
is not in fact configurable from this sub-menu.
This is an indicator that the selected key-switch is configured as a Security switch for a specific
button in the ‘Security’ menu, see Section “7.3.4.5 Security Key-switch Configuration”. This function
is not in fact configurable from this sub-menu.
Default value: ‘Not-Conf’ Default value: ‘Not-Conf’
9. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 9. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
7.3.3
To Next Page
Loading...