VAR4 / VAR12 / VAR20 - Operation Manual
Is
Page 265 of 308
sue: 03 complete, approved
18.2.3 Routing Monitoring
The user can view the current routing status, as described in the following steps.
1. Select TestsÆMonitorÆRouting.
2. For VAR20, move to, and select the required output range:
[Routing 1-12] Routing 13-20
3. The current routing status is displayed for the selected output range:
VAR4:
OP: 01 02 03 04
L03 -- -- --
VAR12 or VAR20 ÆRouting 1-12:
OP: 01 02 03 04 05 06 07 08 09 10 11 12
L05 -- --N01 -- -- -- -- -- -- -- --
VAR20 ÆRouting 13-20:
OP: 13 14 15 16 17 18 19 20
--N02 -- --L05 -- -- --
Where:
OP: VAR Router Output
-- = Nothing routed to the output.
Lxx = Local input routed to the output.
Nxx = Network input routed to the output.
xx = Refer to ASL for details.
4. The system remains monitoring whilst within this menu and finishes when the menu times out or the
BACK is pressed.
To Next Page
Loading...