VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 283 of 308 Page 283 of 308
20.1 Current Fault Status 20.1 Current Fault Status
The currently active faults can be viewed, as described in the following steps. The currently active faults can be viewed, as described in the following steps.
1. Select FaultsÆStatus. 1. Select FaultsÆStatus.
2. Scroll the fault list: 2. Scroll the fault list:
[12Oct2006 16:10 REM01 COMMS ] [12Oct2006 16:10 REM01 COMMS ]
Default value: Most recent record (001/nnn) Default value: Most recent record (001/nnn)
Note: (record number/ total number of records) is displayed on the first line right field. Note: (record number/ total number of records) is displayed on the first line right field.
3. Return to the parent menu by pressing the BACK key. 3. Return to the parent menu by pressing the BACK key.
20.2 Fault Acceptance 20.2 Fault Acceptance
Accepting faults will turn off the audible alarm but current faults will continue to be displayed on the display
the top-level menu.
Accepting faults will turn off the audible alarm but current faults will continue to be displayed on the display
the top-level menu.
L L
Pressing the front panel ‘FAULT ACCEPT’ key can also equally accept faults. Pressing the front panel ‘FAULT ACCEPT’ key can also equally accept faults.
In order to accept faults from the system menu proceed as follows.
1. Select FaultsÆAccept.
2. The system will return to the ‘Fault’ menu after 3 seconds.
20.3 Fault Clearance
Clearing faults will clear all faults from the LCD display and the audible alarm will stop sounding. However if
a fault remains it will be reported again as soon as it has been detected.
User needs to be logged on to clear faults.
!
!
L
• Pressing the front panel ‘FAULT CLEAR’ key can also equally clear faults.
• Pressing the ‘FAULT CLEAR’ button also releases any active amplifier standby switching to
reset the system to a known state.
In order to clear faults from the system menu proceed as follows.
1. Select FaultsÆClear.
2. The system will return to the ‘Fault’ menu after 3 seconds.
To Next Page
Loading...