VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved
Is
Page 55 of 308
6.2.2 Terse View
The terse view provides a single list of configured mainframes with the amplifier power rating and
surveillance mode compressed into a single line, in a similar fashion to how the data is displayed when
‘learn’ is performed, see Section “6.1 Detecting Frames Using ‘Learn’ Mode”.
This information can be used to verify that all mainframe and amplifiers have been detected correctly when
installing the system.
In order to view an amplifier mainframe proceed as follows.
1. Select ConfigurationÆSystemÆViewÆTerse.
2. The configured mainframes are displayed:
[F02 100D - 100N 100S]
Surveillance mode
mplifier rate
Mainframe number
Slot 4 Slot 3 Slot 2 Slot 1
Default values: n.a.
Note: ‘S’ identifies a standby amplifier, e.g. Slot 4.
‘N’ identifies a single circuit surveillance mode, e.g. Slot 3
‘D’ identifies a dual circuit surveillance mode, e.g. Slot 1.
‘L’ identifies a loop return surveillance mode.
‘−’ indicates that the slot is not configured, e.g. Slot 2.
3. Scroll the mainframe list to view another mainframe configuration, or return to the parent menu by
pressing the SELECT or BACK keys.
To Next Page
Loading...