ASL INTERCOM VAR4 - Page 119

VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved Is
Page 119 of 308 Page 119 of 308
11. Move to, and scroll the mode list until the ‘Mode=Not Latched’ mode is displayed in the left field: 11. Move to, and scroll the mode list until the ‘Mode=Not Latched’ mode is displayed in the left field:
[Mode=Not Latched] ResetButton -- [Mode=Not Latched] ResetButton --
Other options available: Other options available:
• [Mode=Latched] • [Mode=Latched]
Configures the button for latching mode. Configures the button for latching mode.
When this mode is selected, the reset button list on the right side is scrollable for selection. When this mode is selected, the reset button list on the right side is scrollable for selection.
See Section “7.3.4.3.3 Configuring a DVA Routing Button for Latching Mode”. See Section “7.3.4.3.3 Configuring a DVA Routing Button for Latching Mode”.
• [Mode=Play Once] • [Mode=Play Once]
Configures the button for ‘Play Once’ mode. Configures the button for ‘Play Once’ mode.
See Section “7.3.4.3.4 Configuring a DVA Routing Button for Play Once Mode”. See Section “7.3.4.3.4 Configuring a DVA Routing Button for Play Once Mode”.
Default value: ‘Mode=Not Latched’ Default value: ‘Mode=Not Latched’
12. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 12. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
7.3.4.3.2