ASL INTERCOM VAR4 - Page 124

VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved Is
Page 124 of 308 Page 124 of 308
11. Move to, and scroll the mode list until the ‘Mode=Play Once’ mode is displayed in the left field: 11. Move to, and scroll the mode list until the ‘Mode=Play Once’ mode is displayed in the left field:
[Mode=Play Once] ResetButton -- [Mode=Play Once] ResetButton --
Other options available: Other options available:
• [Mode=Not Latched] • [Mode=Not Latched]
Configures the button for non-latching mode. Configures the button for non-latching mode.
See Section “7.3.4.3.2 Configuring a DVA Routing Button for Non-latching Mode”. See Section “7.3.4.3.2 Configuring a DVA Routing Button for Non-latching Mode”.
• [Mode=Latched] • [Mode=Latched]
Configures the button for latching mode. Configures the button for latching mode.
See Section “7.3.4.3.3 Configuring a DVA Routing Button for Latching Mode”. See Section “7.3.4.3.3 Configuring a DVA Routing Button for Latching Mode”.
Default value: ‘Mode=Not Latched’ Default value: ‘Mode=Not Latched’
Note: When this mode is selected the DVA play mode is automatically set to DVA-Full. Note: When this mode is selected the DVA play mode is automatically set to DVA-Full.
12. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 12. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
7.3.4.3.4