VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 126 of 308 Page 126 of 308
10. Move and toggle to the required busy indication option in the middle field: 10. Move and toggle to the required busy indication option in the middle field:
Latching [Busy=On] DVA-Full Latching [Busy=On] DVA-Full
• [Busy=On] • [Busy=On]
This route causes a busy indication on the LEDs associated with microphone zone select buttons. This route causes a busy indication on the LEDs associated with microphone zone select buttons.
• [Busy=Off] • [Busy=Off]
This route does not cause a busy indication on the LEDs associated with microphone zone select
buttons.
This route does not cause a busy indication on the LEDs associated with microphone zone select
buttons.
Default value: ‘Busy=On’ Default value: ‘Busy=On’
Note: This is typically set to ‘On’ when routing DVAs or microphone audio, and to ‘Off’ when routing
background music.
Note: This is typically set to ‘On’ when routing DVAs or microphone audio, and to ‘Off’ when routing
background music.
11. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 11. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
7.3.4.3.5
To Next Page
Loading...