ASL INTERCOM VAR4 - Page 134

VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved Is
Page 134 of 308 Page 134 of 308
9. Move to, and toggle to the required protection mode in the left field: 9. Move to, and toggle to the required protection mode in the left field:
[Mode=Not Protected] Switch #-- [Mode=Not Protected] Switch #--
• [Mode=Not Protected] • [Mode=Not Protected]
The button is not protected by a key-switch. The button is not protected by a key-switch.
• [Mode= Protected] • [Mode= Protected]
The button is protected by a key-switch. The button is protected by a key-switch.
When this mode is selected, the switch list is scrollable for selection. Continue on the next step. When this mode is selected, the switch list is scrollable for selection. Continue on the next step.
Default value: ‘Mode=Not Protected’ Default value: ‘Mode=Not Protected’
10. If ‘Protected’, move to, and scroll the switch list until the required key-switch is displayed in the right
field:
10. If ‘Protected’, move to, and scroll the switch list until the required key-switch is displayed in the right
field:
Mode= Protected [Switch # 1] Mode= Protected [Switch # 1]
Default value: ‘Switch # 1’ Default value: ‘Switch # 1’
Switch: 1 to 9 Switch: 1 to 9
Note: One key-switch may be configured to protect more than one button. Note: One key-switch may be configured to protect more than one button.
11. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 11. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
7.3.4.5