VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 136 of 308 Page 136 of 308
8. Move to, and toggle to the required selection option in the right field: 8. Move to, and toggle to the required selection option in the right field:
OUTPUT 01 [Not Selected] OUTPUT 01 [Not Selected]
• [Not Selected] • [Not Selected]
The output is not part of the PTT button zone selection. The output is not part of the PTT button zone selection.
• [Selected] • [Selected]
The output is part of the PTT button zone selection. The output is part of the PTT button zone selection.
Default value: ‘Not-Selected’ Default value: ‘Not-Selected’
9. Repeat steps 7 to 8 to include or omit each output from the PTT button zone selection, as required. 9. Repeat steps 7 to 8 to include or omit each output from the PTT button zone selection, as required.
10. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 10. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
7.4.1
Zone
Selection
To Next Page
Loading...