VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 216 of 308 Page 216 of 308
5. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 5. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Make sure the selected contact is used for remote fault accept function. Once the SELECT
key is pressed, the contact will be configured to act as a local fault accept button and the
previous configuration will be lost.
Make sure the selected contact is used for remote fault accept function. Once the SELECT
key is pressed, the contact will be configured to act as a local fault accept button and the
previous configuration will be lost.
!
!
Reference to Configuration Tool
14.4
To Next Page
Loading...