VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 255 of 308 Page 255 of 308
7. Select the Description menu item: 7. Select the Description menu item:
[Description] [Description]
8. Edit the fault description as required using the arrow keys or the rotary encoder. 8. Edit the fault description as required using the arrow keys or the rotary encoder.
[EXT FAULT ] [EXT FAULT ]
Default values: ‘EXT FAULT’ Default values: ‘EXT FAULT’
Possible value: alphanumeric string of up to 18 characters Possible value: alphanumeric string of up to 18 characters
Note: The DEFAULT key may be used to clear the entire text string to all blank, for speedier input. Note: The DEFAULT key may be used to clear the entire text string to all blank, for speedier input.
9. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 9. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
16.3.3
FAULT DESCRIPTION
DIGITAL INPUT
To Next Page
Loading...