VAR4 / VAR12 / VAR20 - Operation Manual
sue: 03 complete, approved oved
Is
Page 261 of 308 Page 261 of 308
3. Move to, and toggle to the required configuration option in the right field: 3. Move to, and toggle to the required configuration option in the right field:
MIC/LINE 01 [Not Configured] MIC/LINE 01 [Not Configured]
• [Not Configured] • [Not Configured]
Current input is not affected during the Night Time Volume Control active time. Current input is not affected during the Night Time Volume Control active time.
• [Configured] • [Configured]
The current input is affected according to the Night Time Volume Control settings of the output
when it is routed.
The current input is affected according to the Night Time Volume Control settings of the output
when it is routed.
Default values: ‘Not Configured’ Default values: ‘Not Configured’
4. Repeat steps 2 to 3 to configure the Night Time Volume Control function for each input. 4. Repeat steps 2 to 3 to configure the Night Time Volume Control function for each input.
5. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. 5. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Reference to Configuration Tool Reference to Configuration Tool
17.2
17.1
17.4
17.3
To Next Page
Loading...