VAR4 / VAR12 / VAR20 - Operation Manual
Is
Page 81 of 308
sue: 03 complete, approved
5. Move to, and select the Audio menu item, which is shown in different positions for different input types
as follows:
‘Paging Microphone’ and ‘Zoned Fire Microphone’
Buttons [Audio] Ctrl Name
‘Single Button Microphone’
PTT [Audio] Ctrl Name
‘Fire Microphone’ and ‘Miscellaneous Input’
[Audio] Ctrl Name
‘Network Channel’
[Audio] Name
6. Move to, and select the Fade menu item.
Surv EQ [Fade] Chime Gain
7. Move to, and scroll the fade up times until the required value is displayed in the left field:
[Up=00] Down=00
Default value: ‘00’
Possible values: 00 to 50. This value is the fade up time in tenths of a second, so divide by ten for the
fade up time in seconds.
Note: This should be set to ‘00’ on Network Audio Channels.
8. Move to, and scroll the fade down times until the required value is displayed in the right field:
Up=00 [Down=00]
Default value: ‘00’
Possible values: 00 to 50. This value is the fade down time in tenths of a second, so divide by ten for
the fade down time in seconds.
Note: It is important for Fire Microphones to be able to override other sources quickly; therefore Fire
Microphones are set-up for a short Fade Down time.
This should be set to ‘00’ on Network Audio Channels.
9. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
To Next Page
Loading...